Water Baths

Water Baths


External body is made of thick mellow steel sheet properly powder covered painted and inward chamber is made up of 304 evaluation Stainless Steel. Top is additionally twofold walled appropriately protected and is with locking office. Entire unit is mounted on a durable edge iron casing the cooling curls are brazed to the external side of S.s. chamber consequently guaranteeing immaculate and uniform cooling. Protection is finished with thick glass downy to keep any temp. misfortune. For achieving the temp. beneath surrounding, the refrigeration is carried out through CFC FREE hermetically fixed compressor and & for accomplishing the temp. above encompassing, warming is finished with submersion sort warming component .Fitted with stirrer for temperature consistency all around the load. Temperature reach is from 5°c to 90°c is controlled by Double Show Chip PID Advanced Temperature Pointer cum Controller with a correctness of ± 0.5° C Computerized temp. To chip away at 220/230 volts air conditioning supply. The unit is additionally fitted with a FHP PUMP for flowing the cooled fluid to an outer source, for example, condenser curls, and so


A highly in demand instrument where water is required to be circulated to some external source through an F.H.P. Pump. Most useful for circulating water to abbe refractometer, condenser coils etc. Temperature from ambient to 90°c is controlled through an “EGO”/”JUMO” GERMAN hydraulic type thermostat with an accuracy of + 0.5°c. Inner chamber made of S.S And outer chamber made of M.S sheet duly painted. To work on 220/230

Working chamber size

8” x9” x10½”



Made out of heavy gauge S.S. With concentric rings. Auto-cut heating elements are fitted to protect the

Same when bath gets dry. To work on 220/230 volts A.C. Supply.

Working chamber size

300 x 250 x 100 mm (6 holes of 75mm dia)

355 x 405 x 100 mm (12 holes of 75mm dia)



It is a double walled bath with inner chamber made of Stainless and outer wall made of M.S. sheet duly

Enamel painted. The gap between outer and inner walls is filled with special grade glass wool insulation. The concentric rings can be removed to accommodate containers of various sizes

Temperature from ambient to 100° C + 0.5° is controlled by “EGO” / JUIMO GERMAN thermostat

Working chamber size

300 x 250 x 100 mm (6 holes of 75mm dia)

355 x 405 x 100 mm (12 holes of 75mm dia)


These units are double walled with inner chamber made up S.S. sheet and outside of M.S. duly enamel painted. The gap between the walls is filled with special grade glass wool in order to avoid thermal losses. A drain plug is also fitted to the unit. The inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray. The cover is provided with the unit as standard accessory. Temperature from ambient to 100° C is CONTROLLED BY “EGO”/JUMO” GERMAN hydraulic capillary type thermostat with an accuracy of + 0.5°C Supplied complete with 220/230 volts A.C. supply.

Working chamber size

300 x 250 x175mm (for 2 rack)

330 x 300 x175mm (for 4 rack)

455 x 300 x175mm (for 6 rack)

605 x 300 x175mm (for 8 rack)


Stirring arrangement with 1/20 H.P. motor and speed regulator

Digital Temperature indicator – cum – Controller

PI digital temperature indicator – cum controller [stirring arrangement compulsory]


The high precision water bath is rectangular in shape. Its body has two walls, the outer one of mild steel while the inner one is of Stainless Steel sheet. Its two longitudinal opposite sides are provided with glass windows to show inside view of its working.

It is properly insulated with glass wool lagging. STIRRER to maintain uniform temperature of water, an electric stirrer controlled with a speed regulator is mounted on one wall of the bath. THERMOMETER This unit is fitted with an imported thermometer along with a relay. Its heater are immersion type which can be replaced easily, it works 220/230 volt A.C within

An accuracy of ±1ºC. The control panel consists of jewel light, ON/OFF relay and the unit is finished in blue white staving.

Working chamber size

425 x 250 x 225 mm

450 x 375 x 375 mm


Digital temperature controller cum

indicator instead of thermostat and L shape thermometer


It is a double walled unit with inside made of thick S.S. sheet and outer of M.S. sheet duly enamel painted .he paramedical lid made of S.S. prevents falling of condensed water droplets on the specimens. Heating is achieved through an immersion type heater and the temperature is controlled by “EGO”/JUMO GERMAN hydraulic type thermostat with an accuracy of + 0.5°. The bath has an oscillating tray riding on bass rollers oscillated through a geared variable speed motor. Shaking speed range is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or Erlenmeyer flasks of 25mlk or 50ml or 100ml or

250ml or 500ml or 1000ml as ordered by the users. (Kindly maintain the capacity of the flasks while ordering). Supplied complete with one shaking tray, paramedical cover, L shaped thermometer cord and plug, to work on 220/230 volts A.C. supply. Available with heating arrangement only (having temperature range from ambient to 100°C) or with both heating and cooling arrangements (having temperature range from 5° to 100°C).

Working chamber size

275 x 275 x 75mm

275 x 275 x 150mm


Spare shaking tray or test tube rack for part

Digital Temperature Indicator – Cum – Controller

PI Digital Temp. Indicator – Cum, Controller


Double walled with inside make up of S.S. and outside of M.S. sheet duly enamel painted. The gap between the two walls is fitted with high grade glass wool to minimize thermal loss. Temperature range from 50°C to 250° C + 2 C is controlled by “EGO”/JUMO”GERMAN hydraulic capillary type thermostat. a variable speed stirring arrangement is fitted to the unit for maintaining temperature plug to work on 220 / 230 volts A.C. supply

Working chamber size

250 x 250 x 250mm

300 x 300 x 250mm

355 x 355 x 250mm


Digital Temperature Indicator-cum-Controller.

PI Digital Temp. Indicator-cum-Controller.


This double walled unit is most suited for preparing wrinkle free tissue specimens. Inside is made up ofAluminum and outside of M.S. Sheet duly painted. Temperature range from ambient to 80°C + 1°c is Controlled by “EGO””JUMO”german hydraulic type thermostat. Complete with indicators, cord and plug, to work on 220/230 a.c. Supply.

Working chamber size

200m.m.(dia) x 70 m.m (depth)



Mounted on a sturdy angle iron frame the inner chamber is made of thick S.S. and outer of M.S duly enamel painted. The gap between the inner and outer wall is filled with high grade glass wool is order to prevent any loss of temperature. Fitted with ISI marked compressor for effective cooling. Heating is brought about by immersion type heating elements. Temperature range from 5°C to 90°C is controlled by Digital Temp. Indicator -cum-Controller with an accuracy of + 0.5 C. A high speed stirrer is fitted to maintain temperature uniformity. The lid of bath is insulated double walled fixed with hinges and is provided with locking arrangements.

Inner Chamber Size

Working chamber size

500 X 250 X 250 m.m.


F.H.P. pumps for circulation the cooled liquid to external source.

Automatic Voltage Stabilizer 3.0 KVA (TRIPLE RELAY)

One Comment

  1. I must say you have high quality content here. Your page should go viral.
    You need initial boost only. How to get it? Search for: Miftolo’s
    tools go viral

Leave a Reply

Your email address will not be published. Required fields are marked *